Solvent study solves solar cell durability puzzle
Rice-led project could make perovskite cells ready for prime time.
Rice University engineers say they’ve solved a long-standing conundrum in making stable, efficient solar panels out ofhalide perovskites.
It took finding the right solvent design to apply a 2D top layer of desired composition and thickness without destroying the 3D bottom one (or vice versa). Such a cell would turn more sunlight into electricity than either layer on its own, with better stability.
Chemical and biomolecular engineerAditya Mohiteand his lab at Rice’s乔治·r·布朗工程学院reported inSciencetheir success at building thin 3D/2D solar cells that deliver a power conversion efficiency of 24.5%.
That’s asefficient as most commercially available solar cells, Mohite said.
“This is really good for flexible, bifacial cells where light comes in from both sides and also forback-contacted cells,” he said. “The 2D perovskites absorb blue and visible photons, and the 3D side absorbs near-infrared.”
Perovskitesare crystals with cubelike lattices known to be efficient light harvesters, but the materials tend to be stressed by light, humidity and heat. Mohite and many others have worked for years to make perovskite solar cells practical.
The new advance, he said, largely removes the last major roadblock to commercial production.
“This is significant at multiple levels,” Mohite said. “One is that it’s fundamentally challenging to make a solution-processed bilayer when both layers are the same material. The problem is they both dissolve in the same solvents.
“When you put a 2D layer on top of a 3D layer, the solvent destroys the underlying layer,” he said. “But our new method resolves this.”
Mohite said 2D perovskite cells are stable, but less efficient at converting sunlight. 3D perovskites are more efficient but less stable. Combining them incorporates the best features of both.
“This leads to very high efficiencies because now, for the first time in the field, we are able to create layers with tremendous control,” he said. “It allows us to control the flow of charge and energy for not only solar cells but also optoelectronic devices and LEDs.”
The efficiency of test cells exposed to the lab equivalent of 100% sunlight for more than 2,000 hours “does not degrade by even 1%,” he said. Not counting a glass substrate, the cells were about 1 micron thick.
Solution processing is widely used in industry and incorporates a range of techniques —spin coating,dip coating,blade coating,slot die coatingand others — to deposit material on a surface in a liquid. When the liquid evaporates, the pure coating remains.
The key is a balance between two properties of the solvent itself: itsdielectric constantandGutmann donor number. The dielectric constant is the ratio of the electric permeability of the material to its free space. That determines how well a solvent can dissolve anionic compound. The donor number is a measure of the electron-donating capability of the solvent molecules.
“If you find the correlation between them, you’ll find there are about four solvents that allow you to dissolve perovskites and spin-coat them without destroying the 3D layer,” Mohite said.
He said their discovery should be compatible with roll-to-roll manufacturing that typically produces 30 meters of solar cell per minute.
“This breakthrough is leading, for the first time, to perovskite device heterostructures containing more than one active layer,” said co-author Jacky Even, a professor of physics at the National Institute of Science and Technology in Rennes, France. “The dream of engineering complex semiconductor architectures with perovskites is about to come true. Novel applications and the exploration of new physical phenomena will be the next steps.”
“This has implications not just for solar energy but also for green hydrogen, with cells that can produce energy and convert it to hydrogen,” Mohite said. “It could also enable non-grid solar for cars, drones, building-integrated photovoltaics or evenagriculture.”
大米研究生Siraj Sidhik是第一作者of the paper. Rice-affiliated co-authors are exchange student Yafei Wang; graduate students Andrew Torma, Xinting Shuai, Wenbin Li and Ayush Agarwal; research scientists Tanguy Terlier and Anand Puthirath; Matthew Jones, the Norman and Gene Hackerman Assistant Professor in Chemistry and Materials Science and NanoEngineering; and Pulickel Ajayan, the Benjamin M. and Mary Greenwood Anderson Professor in Engineering and a professor of materials science and nanoengineering, chemistry, and chemical and biomolecular engineering. Other co-authors are postdoctoral researcher Michael De Siena and Mercouri Kanatzidis, a professor of chemistry, of Northwestern University; alumnus Reza Asadpour and Muhammad Ashraful Alam, the Jai N. Gupta Professor of Electrical and Computer Engineering, of Purdue University; postdoctoral researcher Kevin Ho, research scientist Rajiv Giridharagopal and David Ginger, the B. Seymour Rabinovitch Endowed Chair in Chemistry, of the University of Washington, Seattle; researchers Boubacar Traore and Claudine Katan of the University of Rennes; and Joseph Strzalka, a physicist at Argonne National Laboratory.
The Department of Energy Efficiency and Renewable Energy program (0008843), the Academic Institute of France, the European Union’s Horizon 2020 research and innovation program (861985), the Office of Naval Research (N00014-20-1-2725), Argonne National Laboratory (DE-AC02- 06CH11357), the National Science Foundation (1626418, 1719797) and the Department of Energy (DE-SC0013957).
Read the abstract athttp://www.science.org/doi/10.1126/science.abq7652.
This news release can be found online atnews.rice.edu.
Follow Rice News and Media Relations via Twitter@RiceUNews.
Ultrathin solar cells get a boost:https://news.rice.edu/news/2021/ultrathin-solar-cells-get-boost.
Solar energy collectors grown from seeds:http://news.rice.edu/2021/06/21/solar-energy-collectors-grown-from-seeds-2/
Research could dramatically lower cost of electron sources:http://news.rice.edu/2021/02/01/research-could-dramatically-lower-cost-of-electron-sources-2/
Mohite Research Group:http://mpem.rice.edu
Rice Chemical and Biomolecular Engineering:https://chbe.rice.edu
Produced by Brandon Martin/Rice University
Images for download:
A discovery by Rice University engineers brings efficient, stable bilayer perovskite solar cells closer to commercialization. The cells are about a micron thick, with 2D and 3D layers. (Credit: Jeff Fitlow/Rice University)
Andrew Torma, an Applied Physics graduate student at Rice University, validates the electronic structure of a 2D/3D perovskite solar cell. (Credit: Jeff Fitlow/Rice University)
The manufacture of high-efficiency solar cells with layers of 2D and 3D perovskites by multiple processes may be simplified by solvents that allow solution deposition of one layer without destroying the other, according to new research at Rice University. (Credit: Jeff Fitlow/Rice University)
Rice University graduate student Siraj Sidhik sets up an experiment to expose a bilayer perovskite cell to artificial sunlight. Cells created in the Rice lab exposed to strong light for 2,000 hours degraded their efficiency by less than 1%. (Credit: Jeff Fitlow/Rice University)
Rice University researchers led a team that developed a method to make multilayer perovskite solar cells that match the efficiency of current commercial cells. From left: Siraj Sidhik, Aditya Mohite, Ayush Agrawal and Andrew Torma. (Credit: Jeff Fitlow/Rice University)
Located on a 300-acre forested campus in Houston, Rice University is consistently ranked among the nation’s top 20 universities by U.S. News & World Report. Rice has highly respected schools of Architecture, Business, Continuing Studies, Engineering, Humanities, Music, Natural Sciences and Social Sciences and is home to the Baker Institute for Public Policy. With 4,240 undergraduates and 3,972 graduate students, Rice’s undergraduate student-to-faculty ratio is just under 6-to-1. Its residential college system builds close-knit communities and lifelong friendships, just one reason why Rice is ranked No. 1 for lots of race/class interaction and No. 1 for quality of life by the Princeton Review. Rice is also rated as a best value among private universities by Kiplinger’s Personal Finance.
Method of Research: Experimental study
Subject of Research: Not applicable
Article Title: Deterministic fabrication of 3D/2D perovskite bilayer stacks for highly durable and efficient photovoltaics
Article Publication Date: 23-Sep-2022
COI Statement: The authors declare no competing interests.
All latest news from the category:Power and Electrical Engineering
This topic covers issues related to energy generation, conversion, transportation and consumption and how the industry is addressing the challenge of energy efficiency in general.
innovations-report provides in-depth and informative reports and articles on subjects ranging from wind energy, fuel cell technology, solar energy, geothermal energy, petroleum, gas, nuclear engineering, alternative energy and energy efficiency to fusion, hydrogen and superconductor technologies.
Blind spots in the monitoring of plastic waste
KIT researchers and partners suspect that much more plastic is transported in flowing waters than previously assumed and are developing new modelling approaches. Rivers play a key role in the…
IceCube neutrinos provide new view of active galaxy
An international team of scientists, including researchers at the University of Adelaide, have gathered new evidence about the energetic core of an active galaxy millions of lights years away by…
2022 Chicago Quantum Summit
… to gather quantum leaders defining the emerging field on Nov. 14-15. Experts in quantum information science and engineering will come together on November 14-15 in Chicago to share their…